🪶Ultra-lightweight (84g): Print up to 11 spools from a single 1kg roll.
🚀Rapid Print Ready: Optimized for speed (PLA~2h 41m PETG-3h28m ABS-3h16m on P1S).
🔐 Authentic Twist-Lock: Retains the original Bambu Lab mechanism for reliable installation.
💧Built-in Desiccant Cavity: Store desiccant inside the spool for AMS moisture control.
📍60° Spaced Holes: Evenly distributed holes for easy and flexible filament tucking.
Printing Material Recommendation
This spool can be printed with PLA, PETG, or ABS.
For use inside AMS HT / AMS 2 Pro drying environments, PETG or ABS is highly recommended due to their superior heat resistance. • PLA drying temperature: ~45°C • PETG drying temperature: ~65°C
The PETG (71°C) and ABS (87°C) versions are fully compatible with the AMS standard drying conditions. For engineering filaments that require drying temperatures above 85°C, the ASA (100°C) or PC (117°C) versions are recommended to minimize the risk of deformation.
2026-07-06 Update: The snap tag has been moved to the lid side for slightly improved usability.
REX3D
