modern minimalist low height planter, with a screw-in drip plate
~ dimensions in mm
larger ~ x • 190 · y • 190· z • 76
smaller ~ x • 126 · y • 126 · z • 50
important
filament should be dry and calibrated so that it deals appropriately with printing the patterns
build plate must be properly clean so that there aren't adhesions issues and lifts during the print
ensure you do not over-tighten the plate and risk breaking the thread, it is a short thread that only requires a small amount of pressure to lock in place
photos show printed in pla matte and pla-cf
.40mm nozzle
adaptive layer height
15% adaptive cubic infill
no supports
notes
commercial licence membership available on my patreon
all photos uploaded are of the actual printed model, and are copyright protected
h3li0
