Minimalistic Alcohol Pad Dispenser

This is an alcohol wipe dispenser that i designed. Under 150 grams to print in less than 3 hours.

 To assemble, pluck off the big support on the main dispenser part. Then, use tweezers or a utility knife to pry off the tiny row of supports inside. Don't worry, they may look hard to remove but they come off very easily : ). ( I tested them many times ) Lastly, stick the smaller end of the stand onto the bottom of the main dispenser column with superglue. After filling your dispenser with alcohol pads, remember to place the cap on the top!

This dispenser fits about 90 alcohol pads of 51mm x 51mm and thickness of about 1.2mm. If your alcohol pads are of different size, you can always change the size of the openings in Bambu Studio easily.

If you like this model, do give me a like to support me : )