SAK 58 mm replacement scales

Victorinox multitools compatible replacement scales. Fits for 58 mm models such as Classic SD.

For the best quality it is recommended to use 0.2 mm nozzle with 0.05 mm layer height. Alternatively, to achieve the highest quality using 0.4 mm nozzle, please use 0.08 layer height with Arachne wall generator. No glue needed.

How to use:

 · Before installation, confirm that scale tools (tweezers and toothpick) fit into the newly printed scales

 · Use both scales to sandwich the multitool while aligning the scale holes into correct positions

 · Carefully apply pressure to one end of the multitool until the scales snaps into place

 · Repeat the process to the other end of the multitool

Please note that the scales are slightly damaged if removed. It is advised to always install unused scales.