Smart display series - Waveshare 5" ESP32 case

Give your Waveshare 5" ESP32 display a clean, professional look.

Unlike most enclosures, this case routes the USB-C connection to the rear of the enclosure using an inexpensive USB-C extension, so there isn't an unsightly cable sticking out of the side. The result is a display that looks much more like a finished commercial product.

Designed from the ground up for easy 3D printing, assembly and everyday use.

Features

• ✅ Rear-mounted USB-C connector for a much cleaner appearance
• ✅ No supports required
• ✅ Front-loading design - simply insert the display from the front
• ✅ No separate rear cover to print
• ✅ All screws are hidden at the rear
• ✅ Built-in stand with two viewing angles
  • Upright
  • Approximately 45° reclined
• ✅ Decorative honeycomb side panels
• ✅ Compact, strong design with minimal material usage
• ✅ Easy to assemble

Printing

The model has been designed specifically for reliable printing.

• No supports required
• Minimal post-processing
• Suitable for PLA, PETG or similar materials

Hardware Required

In addition to the printed parts and screws, you will need:

• Low-profile USB-C connector
• USB-C chassis connector

(See links below.)

Low profile usb connector

USB-c chassis connector

The two cables simply need connecting together. I soldered mine and covered the joints with heat shrink tubing, but twisting the wires together and insulating them with electrical tape will also work.

Why the rear USB-C?

Most cases leave the USB cable exiting from the side, which can make even a nice dashboard look unfinished.

By moving the connector to the rear you get:

• Cleaner cable management
• Better appearance on a desk
• A more professional finished look

Perfect For

This enclosure is ideal for:

• Home Assistant dashboards
• ESPHome projects
• Smart home control panels
• Weather displays
• Clock dashboards
• Status displays
• Information panels
• Custom IoT projects

Future Variants

I'm gradually designing matching cases for additional ESP32 display boards to create a consistent family of enclosures.

Current roadmap includes:

• ✅ Waveshare 4.3"
• ✅ Waveshare 5" (this model)
• Planned support for additional Waveshare displays
• Planned support for Guition and ESP32-P4 based boards

If this model is useful, please consider leaving a Like, Download, or Boost—it really helps me continue designing and releasing new versions.