Fantasia Magic Broom

Fantasia's Magic Broom

A classic, timeless peice of magic directly to your printer, with Mickeys megic brooms! What better accerory for your Scorcerer Mickey than his magic brooms come to life, with sloshing buckets of water. 

Printed in parts, NO AMS required, just some glue and some time.

📌 Recommended printing settings:

• Material: PLA
• Layer height: 0.16 mm
• Infill: 15%
• Nozzle: 0.4mm

supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal

Assembly – Recommended Method on multipart models

• Dry fit: Assemble all parts without glue to check alignment and fit.
• Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together.
• Optional fix: Use glue for permanent assembly.