SAK 58 mm replacement toothpick

Victorinox multitools compatible replacement toothpick with two options: basic and 3-in-1 models. The basic model is simple replacement for the original toothpick. The 3-in-1 model fits double ended Galvanox eyeglass bit screwdriver (not included in the print). Fitting the tiny screwdriver into the toothpick slot is not my original idea. However, there were no design available which also preserves the toothpick functionality, therefore I came up with the 3-in-1 model. Fits for 58 mm models such as Classic SD.

For the best quality it is recommended to use 0.2 mm nozzle with 0.05 mm layer height. Alternatively, to achieve the highest quality using 0.4 mm nozzle, please use 0.08 layer height with Arachne wall generator.

Basic model

 · Tough layer design

3-in-1 model

 · Toothpick

 · Flat screwdriver 1.5 mm

 · Phillips screwdriver 000

The 3-in-1 model requires support to print properly. After printing remove the support and make sure the eyeglass screwdriver properly fits into the slot. Using different support material such as PETG for PLA or vice versa will help with clean support removal.