Stimpy Cat - Ren & Stimpy Show (Multipart, No AMS)

Stimpy Cat - Ren & Stimpy Show (Multipart, No AMS)

"Joy! Oh joy!" Get ready for another massive blast of 90s nostalgia!

Boost MeConverting a classic 2D cartoon character with unique proportions into a well-balanced, multi-part 3D model that fits together seamlessly requires hours of careful engineering, splitting, and test printing.
If this big-nosed, happy cat brought back memories of Saturday morning cartoons and put a smile on your face, please consider supporting my work with a Boost!

This highly detailed figure captures the lovable, dim-witted, and endlessly optimistic Manx cat—Stimpy! This high-detail figure captures him in his full glory, complete with his signature massive blue nose, chubby white belly, and that famously blissful, half-lidded stare.

 

No AMS? No Problem! (Multipart Design)

This model is completely optimized for every single Maker, regardless of your hardware setup:

• Print by Color: Every section is separated into individual files.
• Zero Waste: No multi-color switching means zero filament poop and fast print times!
• Perfect Fit: Engineered with tolerances so everything slots together beautifully. A comprehensive, step-by-step assembly manual is included.

The figure measures 20 cm in height when fully assembled.

To complete television's most iconic and chaotic duo, here is Ren Hoek

 

The fun doesn't stop here!

Diorama Base Planned: Just like with my Earthworm Jim model, I am planning to release a dedicated, detailed Diorama Base for Ren and Stimpy so you can display them together in a classic cartoon scene.

Make sure to Follow my profile so you don't miss the release the ultimate display base!

 

 

Check out my Multipart Models!:

Earthworm Jim

Felix the Cat

Monkey D. Luffy Post-Timeskip

Monkey D. Luffy Gear 5 transformation 

Cute Halloween VOL1:

Cute Halloween VOL2:

Cute Cows

Please read before printing:

This model features fine details and delicate structures.
Make sure your print bed is clean and free from dust, grease, or residue to ensure strong adhesion.
Place your printer on a stable, vibration-free surface, and confirm that vibration compensation is correctly calibrated.
Before printing, double-check that your filament profile matches the material and that your bed temperature is properly set.
For more tips on this topic, check out this video on YouTube. video (Youtube).

 

Print Recommendation:

I recommend printing this Models with the orignal intendet Print Profil: [original] hidden seams, optimised settings.
This includes a layer height of 0.12 mm and hidden seams. The hidden seams is already set in the 3MF file.

 

To reduce print failures, tall parts were distributed across different build plates.

Support Structures:

Be careful when removing the support structures to avoid breaking.

 

Brim is enabled in for increased print stability.

The Design and my Print Profil is designed with minimal but necessary supports.

 

Assemble:

Included is a highly detailed, step-by-step assembly manual to download. 

For assembly, I recommend using PLA glue or plastic glue, preferably a fast-drying one.
I personally use German super glue. It dries within a few seconds and creates a very strong bond.

 

Check out my other Models!