July 20, 2026
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.8mm and the Actual Thickness is 1.96mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #22 (1mm) swap to Blue Gray
At layer #31 (1.36mm) swap to Maroon Red
At layer #36 (1.56mm) swap to Jade White for the rest.
License:
Standard Digital File License
thenours
