Robot Vacuum Stopping Feet for Ikea Chair/Stool

This is higher feet for your Ikea NÄTTRABY Footstool/Chair to prevent your robot vacuum cleaner from climbing the sloping legs and getting stuck. Just remove the screws for the current feet and replace with these. Optionally add pads to save your flooring. Not sure about the compatibilty with other Ikea models but newer chairs/stools have feet similar to my design.
 

I printed mine in PETG for improved flex and durability. There are two build plates with 5 feet for the chair and 4 feet for the footstool respectively. All feet are the same. I think the NÄTTRABY chair model isn't available anymore but maybe it can still help someone else with the same problem.

Also included are are two build plates for my older stoppers to put on the actual legs. You will need to add a zip-tie and tighten it to get it to stick. Experiment with location on the leg to make it work with your robot. These should however not be needed if the feet fits for your chair. For these there are a plates with and without ears. First print one to check that it works and then print multiple objetcs for all legs.

If you send me the measurements I can probably add more models with different dimensions...