Voron 0.1/0.2 MiniSB for Orbiter 2.0 and PINDA sensor

This is the Cowling for the Mini Stealthburner on a Voron 0.1 or 0.2 with an added slot for the PINDA sensor.

So you can enable probing on the Voron0 >> You will not loose any print area, as the pinda sensor is now located on the back below the X-axis extrusion.

Please be aware: I used a modified X-Axis with MGN9. please always check the clearances before taking the printer into action!

A sample Klipper configuration would be:

[probe]#Inductive Probepin: sht36:PC15x_offset: 20.5y_offset: 17.5#z_offset: 0speed: 2.0samples: 3samples_result: mediansample_retract_dist: 1.0samples_tolerance: 0.05samples_tolerance_retries: 3

>> The Z-Offset has to be calibrated!

You can fix the PINDA Probe with a M3x10 screw and M3 hex nut.

The model is based on the version from Zachary Edes, but I modified it, that you can use standard hotend inserts (like for Dragon or Bambu). I also added the possibility to fix the wiring with zip ties like on the original one.