Bambu Lab X1C/P1x Anti-Vibration Feet Adapter

#Update 2025-04-25:  I've added a profile with a new version, that has a slightly wider, insert sloped outward to help create friction to hold in the feet better.  Pleas let me know if you print this and how it works out.

 

These adapters help Bambu Lab's anti-vibration feet stay more stable but still allowing movement.  These also help keep the feet in place since they kept falling out for me, including the new design.

 

This has been updated with a new updated model / profile which includes two plates, with different adapters for both the original anti-vibration feet along with the updated one release in 2024.  You can use the older/shorter version with the new feet, but will have to install the feet upside-down.  Better to use the taller adapter as it fits quite well.

 

To get the feet in, hold it with both hands, and with two fingers, start pushing it down and under the lip, working your way around to get it all.  The original adapter is a little tough, but the redesigned feet with new adapter is easier.

 

Warning: The original adapter holds the anti-vibration feet very strongly and can be hard to get back out if needed. I used channel-locks to squeeze on the adapter near the top of the foot, breaking the adapter open.

 

Boost MeThank you for your support!  This helps me continue to create, update, and improve models to share with everyone.