Bambu X1 Foldable side spool holder with guide

My printer is close to the wall, so I needed a solution that didn't take up a lot of space.
I came across this foldable spool holder from @RichardStein_649422, which is exactly what I needed.
However, I wanted a filament guide. So I took the guides of this spool holder from @BastR and adapted the foldable arm to include the guide.
I also took the opportunity to rework the cylinder, as the original one didn't fit properly in the parts. The new one is thinner and has a collar to lock it in place.

What is included

• Arm (Printed with supports at the magnet holder and hinge)
• Spool holder (2 sizes: most spools will fit right on the shorter one)
• Cylinder (To lock the holder in the arm, insert it from above)
• Filament guide (3 variations: with a single hole, with a PC4-M6 thread, with a PC4-M6 thread)

How to print
I printed it in PLA, 50% infill, no brim.
Supports are required for the arm at the magnet holder and the hinge, as well as for the holder at the hinge.

Additional parts
Two 10x3 magnets to glue at the arm and the holder to make it solid when unfolded.