PSU Mount for The 100

The M3 threaded holes on the PSU I purchased did not line up with the mounting holes in the frame of the 100. This print adapts the holes in the frame to the holes on the PSU. You will need 3x M3 heatset inserts, 3x M3x30, 3x M3x6-10, and 1x M3x40. I purchased the PSU linked on the BoM (https://www.aliexpress.us/item/3256801668868280.html), so this may end up being a fairly common issue.

Installation is quick and easy:

1. Put the inserts into the bracket
2. Attach the bracket to the PSU with the M3x6-10 screws.
3. Attach the bracket to the frame using the M3x30 screws and the M3x40 screw. The M3x40 goes through the frame and the bracket and attaches directly to the PSU. The M3x30 screws should screw into the inserts in the bracket.