Bambu Lab AMS Cable and PTFE Tube Clamps

The dangling tube and cable of the Bambu Lab AMS annoyed my OCD-self so I designed these clamps to tidy them up.

They screw into existing threaded holes of the frame, just use 3mm longer screws than the ones originally installed. With my P1S, M3x8mm screws worked just fine.

Depending on your taste and needs you can use the specific PTFE Tube and AMS Cable Clamps and/or the combined Double Clamp.

EDIT:

I was told that there is a clip under the buffer to hold the cable for you so it won't interfere with the purge chute.

EDIT:

The PTFE tube running from the buffer to the printer moves as the buffer does his job. So I recommend using the AMS Cable Clamp in that sot which allows for a smooth movement while still holding the tube in place.

Print in around 0.1mm layers and use a brim.