Dragon ball (Inspired) Panel pack for the Mystic lamp

The Dragon Ball-inspired panels for the Mystic Lamp are now available! You can customize your lamp with these exciting new designs that capture the show's iconic energy blasts. The new panels are easy to swap out, so you can change the look of your lamp whenever you want.

All panels fit inside of the Mystic lamp https://makerworld.com/en/models/31478#profileId-28050

Print instructions:

Lithophane panel

A 3MF files for the 0.2 nozzle is ready.

I printed mine with a 0.2 nozzle.

Otherwise you can go with a 0.4 nozzle

Layer height: 0.08

Infill:100

Outerwall speed:70 mm/s

Inner wall speed :100 mm/s

Sparse infill: 100 mm/s

Solid infill :100 mm/s

Top surface:100 mm/s

I used white filament.

you can use a 0.4 nozzle but the details will be lower but still amazing.

This lithophane is made with the help of this free amazing tool https://lithophanemaker.com/

Normal panels

Pre colored 3MF files for all models are ready

Layer height: 0.2

Nozzle: 0.4

Infill: 5-10%

Walls: 2

First layer width : 0.55 mm

Start with white and swap to black or any other color at layer 0.4.

The light diffuser is 0.4 mm so 2 layers.

Hi, I'm a student and an aspiring designer. I'm so grateful for the support I've received from people like you. Your support means a lot to me, and I'm excited to share my work with you. If you like my work and would like to support me you can find links to my donation pages below:

https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86

https://www.buymeacoffee.com/KardesDesign