Patchwork Frankenstein

This Frankenstein has a total of 17 rotatable joints. These joints are different from the chain structure. The Frankenstein's joints can be adjusted in angle and fixed, so it can stand and assume a stable posture.
The tightness of Frankenstein's joints is related to the hardness of the material used. The harder the material is used to print, the tighter the joints will be.

I designed a detachable brain for Frankenstein. When Frankenstein installed the brain, his empty eyes became piercing.

I designed the colors for Frankenstein. The colors required for each part range from a single color to up to 4 colors. As long as one set of AMS is connected, a colored Frankenstein can be printed.

3D printing settings
Layer height - 0.2mm
Infill Density - 15%
No supports.

這個科學怪人一共有17個可轉動的關節，這些關節不同於鍊條式的結構，科學怪人的關節可以調整角度後固定，因此可以站立並擺出穩定的姿態。
科學怪人關節結緊迫程度與使用的材料硬度有關，使用愈硬的材料列印則關節的緊度愈緊。

我幫科學怪人設計了一個可以分離的大腦，當科學怪人裝上大腦後，他空洞的兩眼就變得炯炯有神。

我幫科學怪人設計了色彩，每一個零件需要的色彩從單色到最多4色，只要連接1 組AMS就能夠列印彩色的科學怪人。

列印設定

層高-0.2mm

填充-15%

免支撐列印