X1C/P1P/P1S Ring Light - Tron Inspired

Add Printer Light with Style 😎

 

What You Need

• Strip Led (Rgb/Rgbw/White) 12mm Max Tighness, about 1 meter long
  P1S users can just use a regular USB LED strip with the USB port next the the screen. (inside the printer)
• Led Opale (If you want can print it in TPU)
  (Not Mandatory)
• 12 Magnet 10x2mm
• 1 Metal Pin 4x20mm
• Rubber Strip for Glass Bed (Not Mandatory)
• NO GLUE

Assemblage

The model in the Print Profile doesn't need glue or extra pieces for assemblage.

Dovetails are calculated to assemble it solidly but not in a permanent manner.

 

1) Joint all pieces (Base and Ring)

 

2) Add The Magnets

 

2b) Optional - Add the rubber strip at the top of the base

 

3) Put the LEDs in Place. Use the Hole on the bottom to pass wires

 

4) Add the Led Opale (Printed or Buyed)

 

5) Connect the Ring at the Base with the Metal Pin

 

 

6) Remove the Printer Glass

7) Put it in Place and adjust it until you feel magnets make a strong connection

9) Put the Glass on it

 

Upgrade 1.1

New profile for Extra Piece with fontal Lip for everyone who is not confident because of the glass.

Upgrade 1.2

New Profile with Ventilated Frame

 

Future Improvements

The model is created to be updated with accessories or alternative pieces, think about that if you want to glue it.

• Ring bracket for GoPro Mount
• Rear base piece with hidden hinge for glass

If you have some good ideas about improvement feel free to make suggestions in the comment

 

A video is worth a thousand words
__________________________________________________________________________

Boost MeBoost is FREE for You but AWSOME for ME.
What a strange society today, You can pay me for my work without spending a single dollar.

Hey, If you like my Stuff Maybe You also like my SHOW