Dust Cover for P1P, P1S, and X1 Z Axis

If you have TPU filament, try my improved version here.

 

This is a cap that covers the top of the z-axis threaded rods to prevent dust and filament bits from getting in there.

2 covers print in roughly 9.5 minutes and uses 1 gram of filament.

 

There is a round cutout so the top of the rod/rubber plug does not rub against the printed cover!

Optimized for 0.16mm layer height and 0.4mm nozzle.

If printing ASA or ABS, increase the “Max fan speed threshold → Layer time” in Filament Cooling settings to at least 6 seconds.

 

To install, simply snap into place with 2 fingers using a very small amount of force.

Easily removable with your fingernail.

 

Due to variances in printing, if you want an absolutely perfect fit - please try printing 4 and choose the best 2.

You can also try scaling X/Y/Z by 0.3% - 0.5% in the slicer.

 

Boost Me