TCG Card Stand with Tera Crystal Pattern (Pokemon)

This is an easy to use stand for stand sized trading cards such as Pokemon and MTG. It has a fun “Terastallized” or “Crystalized” pattern on the front, that is easy to print in two colors. There is just one filament switch so an AMS is not required.

The front of the frame has integrated supports. They need to be bent side to side to remove. Then the front and back of the frame snap together, and then the frame fits snuggly in the base. Note that the frames will be tight, start from the top and work down. You may need to flex back piece a bit to get the assembly together.

There is an optionally removable shim in the bottom of the front frame. This is in case you are using a toploader with a larger bottom edge. You can bend the shim towards the opening to loosen and remove it.

Please also check out my plain version of this frame: https://makerworld.com/en/models/238358#profileId-254244