March 23, 2024
Description
NEW : inserts to store SD cards and game cartridges compatible with this design !
You can also check out my foldable Dice TowerBox made to fit inside my deckboxes !
Optimized, compact, a KaibaCorp product.
Enough space to fit up to 130 double-sleeved cards (200 simple-sleeved or 400 sleeveless, 82×96×76mm) but compact enough to fit in any bag.
From 4 to 12 3×5ømm magnets for the enclosure. Obviously better with 12.
💾 Files included 💾
- Top and bottom parts
- A divider
- A 3mm LED mockup
On the right side, there is 2 holes for LEDs. Glue 3mm LEDs inside or 2 printed mockup.
💵 A word to pro-printer/seller 💵
Attribution is mandatory. Just add my IG (@rubiksensei) and/or my cults3d page link at the end of the product page.
-------------------------------------------------------------------------------
Orientation of the lid as in the picture for best exterior quality, or upside-down for faster print and less waste
0.8 to 1.2mm wall thickness minimum
0.8mm top/bottom thickness minimum
6% to 10% infill is enough
5mm brim or raft ! Highly recommended !
License:
BY-ND
Rubiksensei
