NA Mazda Miata Side Skirt

Mazda Miata Side Skirt (NA)

The download file has both Driver and Passenger sides ready for print. The logos have been pre-flipped to allow for correct orientation.

I used Bambu Lab Basic PETG for my version.

For this print, I would opt for more walls over infill. I recommend 4+ walls

Additional Resources needed:

There are two lateral holes one 6mm and one 8mm respectively.

The length of each hole is 55"

Preferably carbon rods are used, to strengthen the skirt, but wood or similar lightweight rods will work the same.

Print settings:

Use PETG or ABS or ASA or stronger material with better heat resistance.

Layer Height: 0.28mm base with variable layer height

Perimeters: 4+

Infill: 10% Gyroid

Support: None