Garden hose 3/4" device adapter

Gardenhose / gardena to ¾ inch thread, commonly referred to as device adapter or Geräteadapter. Needs an O-Ring that can be found with my other models. Print in high quality for a good thread. The part where you screw this in needs a sealring. Happy watering :)

If your print leaks there might be several reasons: (1) Filament dryness and printing environment. Wet filament and temperature changes lead to shrinkages or enlargements in the final print up so several mm. This is a significant delta which causes the O-Ring not to fit tightly. Solution: dry filament and control printing environment. (2) O-Rings do not fit to printed model. This effect comes from very slight variations in O-Ring manufacturing tolerances and print-tolerances. Original Gardena O-Rings might be 0.5mm smaller than what the model would require to seal the space between adapter, O-Ring and quick-release on the hose itself. Solution: scale up the O-Ring from my models or use the slightly bigger version (coming up). My first advise would be to use a 5% scaled up O-ring printed from TPU.