RC F1: HPD EVO Optional F1 2022 Body Wide Flat ESC Standard Orientation Multi piece and One Piece

This a wider F1 body so you don't to place the ESC vertical and is also multi piece for smaller printers and can be multi color.

It needs some glue for the lower venturi portion. Please take your time and I recommend not bonding the entire section in one shot. Start by gluing the front section before the curve and let dry, than add more glue a bond the curb section and after do the more rear part. The part and body are some what flexible so you will be able to add the glue and have a nice clean line.

This body also has a lower profile nose compared to the original narrow body. The rear has higher clearance for brushless motors; it has a ton of clearance for brushed setups. Lower overall profile all around that could be better for aerodynamics and weight.

Also there is to noses that you can use. One is for the stock wing pictured that is high downforce for racing and the other is a 2022 looking front wing. You can also use the stock HPD EVO high downforce wing or the 2022 looking rear wing with the additional parts.

Enjoy.

Edit: The newest HPD Development front chassis will not work. Use the front chassis in this link.