Heavy Duty Shelf Bracket

Heavy Duty Shelf Bracket

Bracket made for a heavy load.
Make sure to print them at max. 0.20 or there is a risk of the model not sticking to the bed.
The bracket measures 240x240mm and fits a 250mm and 300mm shelf perfectly.
To avoid too many visible holes in the bracket, there are only 2 holes for the screwdriver so you can tighten the screws.
If you want to add strength to the model, do it by adding extra walls, don't tweak the infill for that.

Disclaimer: The design is made for heavy duty, but the filament needs to be able to withstand stress as well. 
To ensure the brackets are TRUE heavy duty, use a filament like petg-cf, pa or filaments with similar strength properties.

Happy Printing!

Me and my brother spend time on this for our own enjoyment and just want to share our work with the community.

If you like any of our models we would appreciate a comment or upvote on the model you like.
Also, always feel free to contact us if you have any suggestions for new or current models.
If you want to buy us a coffee use our Paypal