Star Wars (Inspired) The Mandalorian HueForge

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Elegoo Black Transmission Distance: 0.3
PLA Elegoo Gray Transmission Distance: 2.5
PLA Elegoo Gray Transmission Distance: 3
PLA Elegoo White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #13 (1.12mm) swap to Gray
At layer #20 (1.68mm) swap to White for the rest.

Enjoy :)