Bio Trash Monster Waste Bin

Bio Waste Monster Trash Bin

About

• The Bio Waste Monster Bin lives on your bathroom counter and devours bio waste like used wipes, cotton tips, and dental picks.
• Its body size of 16cm wide by 13cm deep by 18cm tall (excluding eyes) holds days of waste before emptying is required.
• An optional inner container model is provided if you need one.
• There are 3 eye styles to choose from. Mix them for more choices.
• Don't fancy a monster sitting on your counter? Print the non-monster version.

Printing

1. Choose between the monster and non-monster version.
2. For either version, you will need to print the Bin Top, Bin Bottom, and optionally the Inner Container.
3. For monster design:
   1. Print the Door with bio waste logo.
   2. Print one or more styles for the eyes.
4. For non-monster design:
   1. Print the Door without any logo.
   2. Print the Top Tray, and Tray Bottom parts.

The print profile that I've uploaded:

• Has all the different model options, including 3 styles of eyes. Print only the parts you require.
• The 3 styles of eyes and door with logo have been pre-colored for multi-color printing.

Assembly

1. Door
   1. Make sure the door is orientated correctly.
   2. Insert one end pin of the Door to the corresponding hinge hole on the Bin Top. Then firmly guide the other end in.
   3. If you find it too difficult to insert the end pins, slightly file the end pins shorter.
2. Eyes
   1. For style 1 and style 2 eyes, attach the Brows to the respective Eyes first.
   2. Then insert the Eyes into the Bin Top attachment holes.
3. Top tray (for non-monster version)
   1. Fit the Tray Bottom into the Tray.
   2. Insert the Tray into the Bin Top attachment holes.

___

Please check out my other models too, TYVM!

___