The Hanger - Picture Hanging Tool

Let's face it, hanging pictures can be a daunting task. Getting them exactly where you want them. Nailing holes in your wall only to find it's not where it needed to be. “The Hanger” makes hanging pictures almost enjoyable!

1. Attach the Hanger Tool to the frame (easily works with Sawtooth, Triangle, and D-Ring frame hangers).
2. Position the frame in the desired location.
3. Holding “The Hanger” firmly, remove the frame.
4. Insert the nail in the hole of the triangle (where the frame was being held).
5. Tap lightly on the nail to locate this position.
6. Remove the Hanger Tool and nail.
7. Line up the lower notch on the left edge with the nail mark from step 5.
8. With "The Hanger" l vertical/plumb, use the upper notch to locate and hammer the frame nail.

That's it!