Decorative small signs for the desk and not only

Several small signs with some famous sayings in Latin and English provided with their "feet". 
The feet is provided in a separate STL file and should be printed with brim.

Sign Dimmesions: 80x35x4mm

Print parameters:

• Layer height - 0.16mm
• Perimeters - 3
• Infill - 10% is sufficient (infill type doesn't matter)
• Brim - NO for the sign, YES for the feet
• Support - NO
• Raft - NO
• Place on face - horizontally on the back face of sign/feet
• Filament type - PLA

Could be printed even in multicolor without AMS, MMU, or similar.

For multicolor print:

When printing at 0.16 layer height: put the printer in Color Change mode(G-code M600) at layer 16 and then change filament
When printing at 0.2 layer height: put the printer in Color Change mode(G-code M600) and then change filament

You can increase dimmesion at will but pay attention if you want to print in multicolor, this will change the layer number when you must put the printer in Color Change mode(G-code M600).