4-way PTFE splitter - no hardware necessary

This is a 4 way version of my y-splitter / y-connector (https://makerworld.com/en/models/393265)

This is again a 100% 3D printable connector/splitter solution for the Bambulab printers P1P, P1S or X1.

The only thing you will need is 30mm PTFE tube between the PTFE tube connector of your printer and the Y-connector/splitter, see the image (blue PTFE tube).

The mounting plate is optional the Y-connector/splitter works just fine without it.

There are 3 different mounting plates to choose from, one with no hardware, one with that use two 6mm M3 screws and one that uses two 8x3mm magnets.

Hope you find the model usefull.

You can also see my other printable add-ons for the Bambulab printers:

https://makerworld.com/en/models/213926#profileId-233439 (AMS button adapter with PTFE tube)

https://makerworld.com/en/models/402613#profileId-304285 (Dual purpose bed scraper)

https://makerworld.com/en/models/393265#profileId-294453 (Y-splitter connector for PTFE tube)

https://makerworld.com/en/models/394761#profileId-295931 (If you need to connect two bowden/PTFE tubes)

https://makerworld.com/en/models/375898#profileId-275865 (Drybox IKEA samla 22l)

https://makerworld.com/en/models/404520#profileId-306293 (Purge strip bin for Bambu P1S)