Running Dinosaur Automaton

奔跑的恐龍自動機

這是一個恐龍自動機！

我喜歡恐龍，因此設計了這款自動機來模仿恐龍奔跑的動作。我花了很多時間和多次迭代才完成這個設計，希望它的動作更像一隻真正在奔跑的生物。

這個恐龍自動機通過USB供電，方便地連接到電腦或其他USB供電的裝置上。您還可以連接速度控制器，根據需要調整恐龍的奔跑速度。

我熱愛動物和機械設計。希望這款我設計的恐龍自動機能帶給大家一些樂趣和驚喜！
 

建議：
1.組裝時請務必按照說明書的步驟進行。
2.打印上半部的恐龍時盡量減少內部填充以減少恐龍的重量。(建議小於10%)
3.顏色建議：恐龍使用較明亮的色彩，底座使用較深並且低飽和度的顏色，以突顯主題。

1.不需要擴展更多用電器，將IA005替換為IC001+XC003。

2.LA008內包含一條連接線，當使用了XC003後，原連接線長度夠用，將IC005去掉。

3.當不需要調速時，IA002作為可選零件。
 
 

Running dinosaur automaton assembly.

It's a dinosaur automaton!

I love dinosaurs, so I designed this automaton to mimic the motion of a running dinosaur. It took me a lot of time and many iterations to finalize this design, hoping it would move more like a real running creature.

This dinosaur/triceratops automaton is powered by USB, making it easy to connect to a computer or other USB-powered device. You can also connect a speed controller to adjust the dinosaur's running speed as needed.

I love animals and industrial design. I hope this dinosaur automaton I designed can bring you some fun and surprises!

suggestion: Please be sure to follow the steps in the instruction manual when assembling.

Color suggestions: Use brighter colors for the dinosaurs and darker, less saturated colors for the base to highlight the subject.

1.If no additional electrical appliances are needed, replace IA005 with IC001 + XC003.

2.LA008 includes a wire. When using XC003, the original connection wire is long enough, so remove IC005.

3.When speed regulation is not required, IA002 can be an optional component.

NOTE: If the dinosaurs couldn't run, please check whether the screws in the red circles on both sides are too tight. You can turn them back half a turn to loosen the joints.