Red Ironic Box Car/Refrigerator magnets-modifiable

非二次创作 No secondary creation

中文：
【在切片软件中可以随意更改字的内容。】

我在其他论坛上看到这个模型就爱上了它，但我下载后发现他们制作过程非常繁琐，需要螺丝，而且有点简陋，我重新建模设计了一个升级版本，可以让大家一次打印就完成，无需任何其他操作！

我的配色为木色、红色、金属灰、金黄色。

兼容侧面夹式手机支架

背面留有两个磁铁凹槽，放置直径1.8-2.1cm厚度0.15-0.25cm的磁铁，可以稳定贴在冰箱上。镰刀锤子最好也用一点胶水固定。
盒子底部留有一个插入透明材料的缝隙，建议使用0.3-0.5mm的透明PVC，尺寸建议62*78mm(越厚越硬越容易安装)
镰刀锤子为一体打印，支撑容易拆除，请务必使用优质耗材才能出来好的效果。

***如贴在车身外，务必使用强力胶水！！！***

#本模型只是作为一种娱乐符号产品，不代表任何个人立场、政治观念、信仰文化的理念。

我是一个脑洞大开喜欢原创的作者，欢迎查看我的其他作品。

-----------------------------------------------------------------------------------------------------------------------------------------

EN：
【 The content of words can be changed freely in the slicing software. 】

I saw this model on other forums and fell in love with it, but when I downloaded it I found that they were very tedious to make, requiring screws, and a bit crude, I re-modeled and designed an upgraded version that can be done in one print without any other operation!

My color scheme is wood, red, metal gray, gold.

Compatible with side clip-on phone holders

There are two magnet grooves on the back to place magnets with a diameter of 1.8-2.1cm and a thickness of 0.15-0.25cm, which can be stably affixed to the refrigerator. The hammer and sickle should also be secured with a little glue.
There is a gap at the bottom of the box to insert the transparent material, it is recommended to use 0.3-0.5mm transparent PVC, the size is recommended 62*78mm(the thicker the harder the easier to install)

The hammer and sickle are printed in one piece, the support is easy to remove, please be sure to use high-quality consumables to get good results.

*** If attached to the outside of the car body, be sure to use strong glue!! * * *

# This model is only used as an entertainment symbol product, and does not represent any personal position, political concept, belief culture concept.

I am an imaginative and original writer, please check out my other works.