This box opener is made to open boxes ;)
Can cut most types of packaging tape.
If you like this model, please consider gifting me your Boost. Thanks
UPDATE
There is a V2 of this box opener, check it out:
https://makerworld.com/en/models/427807#profileId-331755
Disclaimer / Terms of Use
- Use at Your Own Risk: This design is provided "as is" for hobbyist purposes only. I am not a professional engineer and shall not be held liable for any damages (property damage or personal injury) resulting from the use or failure of this model.
- Material Selection & Preparation: You are responsible for choosing the correct filament (e.g., heat-resistant or flame-retardant) for your specific application. Ensure that the filament is completely dry before printing. For maximum structural integrity and mechanical strength, it is necessary to use a freshly unpacked, new spool of filament.
- Electronics Warning: When used in combination with electronics, ensure proper insulation and adequate ventilation. Do not use this model with electrical voltage unless you are a certified professional.
- No Warranty: I cannot guarantee the mechanical strength or dimensional accuracy of the print, as 3D printing results vary significantly depending on the printer, calibration, and individual settings.
This is a Box Opener, do not use it to hurt yourself or others!
Tim
