Fire Dragon HUEFORGE

Feel free to scale to whatever size you like just make sure to keep the Z height the same as orignial

**I used ESUN fire engine red instead of sunlu

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #14 (1.2mm) swap to Orange
At layer #22 (1.84mm) swap to White for the rest.