Windproof Bird & Insects Watering Place

The goal here was to make a watering place for birds and insects that won't fly away when the next storm comes by.

You can attach a ground anchor or a pole adapter to the bottom.

The lattice is for easy cleaning and has an extra area to hold some rocks in place for the insects.

You can use some 5x1 magnets to hold it in place but it's probably not necessary if you have rocks inside and you won't see it if you don't use them.

As a bonus I designed a holder for the bird buddy. I just put it up today, so I haven't gotten any pictures from it yet.

The bird buddy has an IP67 rating, so please be warned. I don't know how good it will hold up if it gets all wet there. It needs a 10x2 magnet.

Use at your own risk!

The pole adapter has a 25mm inner diameter, just like the one from the bird buddy. 

For the bowl you need to turn off the cali extrusion, otherwise it will run through the part. Or you stand by and remove it when done.

I hope the profiles work for you! Happy printing! :)