Vic Rattlehead - Megadeth HueForge Magnet

Common Vic Rattlehead pose from Megadeth art. Hueforge with 2 -25mm circle cutouts on the bottom for magnets. Model size is 60x75x5.

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm

Filaments Used:
PLA+ IIID Max Black Transmission Distance: 0.5
PLA+ IIID Max Blue Transmission Distance: 2.8
PLA+ Ankermake Red Transmission Distance: 5.6
PLA PolyLite Pro Cold White Transmission Distance: 1.2

Swap Instructions:
Start with Black
At layer #25 (4mm) swap to Blue
At layer #27 (4.32mm) swap to Red
At layer #29 (4.64mm) swap to Cold White for the rest.