Universal Carry Handle for 3D printers and tools

UPDATED Jan 31st 2025:

Remodeled the handle using standard sizes.

The dimensions between the holes is now 120mm, which makes it easier to use a template on where the handles will go.

Print profile is changed. Object is printed on the side with a small amount of supports for the handle ends.

This results in a smooth feel for the entire handle and a stronger handle due to print orientation.

Simple Carry Handle to use for example on 3D printers with T-slots, workshop tools that require handling or drawers!

The holes allow for M4 screws to be used.

For general sizing please see the attached image.

Updated the print profile so the handle is printed on the side.

This may obviously leave a textured feel on one side depending on the build plate that is used.

Printing the handle upright will remove that issue but then supports are recommended to achieve a more ‘gentle to the touch’ handle.