HSW Tweezer Holder

Tweezer Holder for the HSW

Tweezer container, easy to print with 2 models to choose.

Can be printed without support.

Easy to Snap to your Honeycomb Storage Wall.

Tweezer Dimension

This holder is designed based on the regular tweezer with the following dimensions.

• T Thickness must be less than 5mm when it is in compression.
• W The tweezer must have a maximum of 14 mm.
• L The length can be 110 mm or more

Print orientation:

Print flat as the image shows. No needs support.

Print Settings:

• Material: PLA/PETG
• Layer height: 0.2
• Perimeters: 4
• Infill density: 25%
• Outer Brim 3mm or Glue (Recommended)

Happy Printing!!!