No AMS required, just print the parts in different colors.
Please ensure your printer bed and selected filament have good adhesion.
There are two choices for the “1” side of the dice, a single dot pip or a heart shaped pip.
The print profile I've uploaded has brim enabled for the dice body. If you are downloading the raw files, please refer to the print profile I've uploaded for brim settings.
Depending on your climate, use materials that are suited for car cabins.
Safety
Ensure safety first if hanging the dice within the car cabin:
The dice should not create distractions for the driver or obstruct the driver's view.
The dice should not adversely impact other objects around it as the vehicle moves.
The string used should be shorten to not allow a small hand to pass through.
The materials used to print the dice should be suited for a car cabin under different weather conditions.
Assembly
After printing, remove the brim from the dice body. Using a deburring tool or file if necessary to get a nice finish.
Do the following before inserting the pips!
Thread one end of a suitable string through the corner hole. Pull out the string end using the larger opening on the “1” face. A pair of tweezers will be helpful.
01makes
