Silica Gel Container

Silica Gel Container: Keep filament dry for top 3D prints. Moisture shield for best results.

Make sure to choose the correct print profile!

Pressure-Fit Version is for Bambu spools only!

Note that different materials have different outcomes. I used Bambu PLA Basic White.

Standard Version min. silica size 1.5mm
Presssure-Fit Version min. silica size 1.65mm

Presssure-Fit Version:

Step 1:

Insert the container from this direction.

If you insert it the wrong way, you may have trouble fitting it properly.

Step 2:

Insert the container bottom-first into the spool and press until it clicks into place.

To remove, push from the opposite side.

Dimensions (Standard):

Wall thickness 1.5mm - slits 1.5mm
Outer dimensions 50mm x 48mm

Dimensions (Pressure-Fit Version):

Wall thickness 1.65mm - slits 1.65mm
Outer dimensions 55mm x 60mm