Hueforge - Spiderman Swinging

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.12mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Esun Dark Blue Transmission Distance: 1.5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 0.5

Swap Instructions:
Start with Black
At layer #15 (0.68mm) swap to Dark Blue
At layer #18 (0.8mm) swap to Red
At layer #24 (1.04mm) swap to Orange
At layer #30 (1.28mm) swap to Yellow
At layer #39 (1.64mm) swap to Jade White for the rest.