April 18, 2024
Description
Upscaled version of popular starfighter. Total number of pieces is 87 (parts invetory is listed below, raw bricks are included if you want to use different slicer). After priting remove supports and brims and you're good to go. Tolerenaces are designed to fit without glue, so it might be a little stiff (I printed mine on P1S with combination of bambu and non bambu filaments and didn't need a tools or glue).
| 4 | Black Bar 3L |
| 4 | Black Technic, Pin with Short Friction Ridges |
| 2 | Black Minifigure, Utensil Ingot / Bar |
| 4 | Dark Gray Minifigure, Utensil Ski Pole |
| 1 | Dark Gray Plate, Modified 1 x 2 with Tow Ball on Side |
| 2 | Dark Red Plate 1 x 4 |
| 4 | Dark Red Tile, Modified 1 x 2 Grille with Bottom Groove |
| 4 | Light Bluish Gray Brick, Round 1 x 1 |
| 8 | Light Bluish Gray Minifigure, Weapon Lightsaber Hilt Straight |
| 1 | Light Bluish Gray Plate, Modified 1 x 2 with Small Tow Ball Socket |
| 2 | Light Bluish Gray Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side |
| 1 | Light Bluish Gray Slope, Curved 2 x 1 x 2/3 |
| 1 | Light Bluish Gray Slope, Curved 2 x 1 x 2/3 Inverted |
| 2 | Light Grey Plate, Round 1 x 1 |
| 1 | Transparent Slope 30 1 x 1 x 2/3 |
| 1 | Transparent Tile 1 x 1 |
| 4 | White Plate 1 x 1 |
| 4 | White Plate 1 x 2
|
| 10 | White Plate 1 x 4 |
| 2 | White Plate 2 x 2 |
| 4 | White Plate, Modified 1 x 2 with 1 Stud (Jumper) |
| 4 | White Plate, Modified 1 x 2 with Clip on Side |
| 8 | White Plate, Modified 1 x 2 with Pin Hole on Top |
| 1 | White Plate, Modified 2 x 3 with Hole |
| 4 | White Slope, Curved 2 x 2 x 2/3 |
| 2 | White Wedge, Plate 4 x 2 Left |
| 2 | White Wedge, Plate 4 x 2 Right |
License:
Standard Digital File License
LimaMike3D
