Taylor Swift Coaster

Ever wanted to slam a cup on top of Taylor Swift's face? Well now you can :D This is a really quick print, about 35 minutes on the Bambu, with only one colour swap between the black and white colours.

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm

Filaments Used:

- PLA Kingroon Black Transmission Distance: 0.4
- PLA Kingroon White Transmission Distance: 8

Swap Instructions:
- Start with Black
- At layer #6 (1.2mm) swap to White for the rest.