A10 Plane Kit Card

Overview

A-10 Kit Card upgraded to 3D fuselage format. Perfect for aviation enthusiasts that want to build and showcase their planes!

Check out the F-16, SR-71, B-52, A-10, 787, and Darkstar!

Check out the full airplane kit card collection → linked here!

Profiles

• Kit With Frame
  • plane in a kit card format ideal for gifting to others
• Kit No Frame
  • plane without a kit frame ideal for assembly right off the printer

Filament

As shown:

• eSun PLA+ Gray
• Hatchbox PLA Gray
• Bambu Lab PLA Black

Tips

• Model requires close tolerances to ensure snug but not tight or loose fit
  • Make sure the model cools to room temperature before assembly
  • Ensure filament is properly calibrated with no excessive over extrusion
  • If there is some over extrusion the parts may need to be lightly sanded at interfaces for fitment 
• Ensure good bed adhesion
  • Make sure printer is fully calibrated
  • Make sure print bed is clean & dry (soapy water is my favorite for cleaning - simple & works)
  • Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)
  • Cooling & Temps - make sure they are correct for your printer, build plate, and filament
  • Smooth PEI plate is recommended

Assembly

• Remove all pieces from the kit
• Debur as needed to smooth edges

• Hold fuselage halves together

• Insert wing into forward fuselage slot

• Insert horizontal tail into aft fuselage slot

• Insert engine pylon into fuselage

• Connect engine halves with connector

• Insert engine into engine pylon

• Insert missiles into wing

• Place airplane onto stand

• Enjoy!

Snap into place design