Hose adapters for all common (at least what I could find online) hose sizes.
All adapters have:
Each size has an option of Outer Diameter measurement or Inner Diameter.
Outer Diameter (OD): Intended for the printed tube to go inside your existing hose.
Inner Diameter (ID): Intended for the printed tube to go over your existing hose or nozzle.
40mm long connector at each end
3mm taper on each connector, from -1.5 to +1.5
Wall thickness of 2mm
A hose stop on the large end
Designed so supports are not needed
Printing
2025-01-17: I have added print profiles for the models to make it easier to print. With each folder as a single print profile. Its slow to do so please let me know if its helpful, and I will do for my other models?
Perimeters 5:
The model should be printed so that its all walls, (except for the stop if you want). Increasing the number of perimeters to 5 should do be enough but check in the slicer
Orientate so stop is tapered side
Supports are not needed
The stop is tapered on one side. Stand the model so its tapered side down to get best results
Â
These were all generated with this OpenSCAD Parametric model. If any of these don't suit you can customise your own, or let me know and I can generate it.
ostat
