Scandinavian Style Watering Can
This is a modern, stylish and minimalistic watering can, inspired by some of the comercially available scandinavian designs.
Boost MeIf you enjoyed this model, please consider boosting it to support the creator!
Printing:
- Your printer needs to be tuned to handle a 45 degree overhang without issues!
- Print upside down, so that the spout rests in the print bed.
- 0.16mm layer height recommended for better overhangs.
- 15mm outer brim highly recommended.
- 3 Wall loops
- Top and Bottom shell thickness set to 2mm
- Paint seams like this to improve the overhangs on the spout:
- Supports are not necessary if you have bridging well tuned, but you could paint some on the underside of the handle:
MakingSingularities
