Pokemon Charizard Pixel Art

Pokemon Charizard Pixel Art

Dimensions: 46 x 44 x 1 cm 18.1 x 17.3 x 0.4 inch (length, height, depth)

Print Settings:

Use standard setting .20mm Layers + Only one wall on first layer + AUX OFF

No Supports

Total pieces 2915, construction time approximately 4 HOURS

I used:

677 Pins BLACK Sunlu PLA+

2 Pins GREY Sunlu PLA+

17 Pins SILVER Sunlu PLA+

169 Pins WHITE Sunlu PLA+

66 Pins RED Sunlu PLA+

136 Pins CYAN Bambu Lab PLA Basic

349 Pins BLUE Sunlu PLA+

30 Pins BLUE LIGHT Sunlu PLA+

79 Pins PINK Sunlu PLA+

675 Pins ORANGE Sunlu PLA+

71 Pins LIGHT YELLOW

306 Pins YELLOW ORANGE

36 Pins YELLOW Bambu Lab PLA Basic

302 Pins BROWN Bambu Lab PLA Basic

For LIGHT YELLOW and YELLOW ORANGE I used 2 colors to get them.

LIGHT YELLOW 0.2 mm of Bambu Lab PLA Basic Yellow and Sunlu PLA+ White for the rest

YELLOW ORANGE 0.2 mm of Bambu Lab PLA Basic Yellow and Sunlu PLA+ Orange for the rest

If you already have the shaded colors, print those directly, otherwise I have prepared a file where you can test the shades directly with your colors. So as to have an excellent result, as the shade changes according to brand, model, color, material, etc...

I have also included an extractor to make it easier to remove the pins in case of a mistake.

Fit the pins on the opposite side to the printing surface to obtain a planar result. The pins must be lightly pointed by hand then a hammer is needed to drive them all the way in.

Here you can understand where the colors are positioned. Have a good construction