Y-splitter connector straight pass - no hardware!

This is my Y-connector/splitter solution with a straight pass through for the AMS and a more curved pass through for the extra tube.

Is a 100% 3D printable Y-connector/splitter solution for the Bambulab printers P1P, P1S or X1.

The only thing you will need is 30mm PTFE tube between the PTFE tube connector of your printer and the Y-connector/splitter, see the image (blue PTFE tube).

Remember to push the PTFE tube all the way inside the Y-splitter it must touch the inner “stops”.

The mounting plate is optional the Y-connector/splitter works just fine without it.

There is three different options for brackets, one with no hardware, one with 2x 6mm M3 and one with 2x magnets 3x8mm.

Hope you find the model usefull.

You can also see my other printable add-ons for the Bambulab printers:

https://makerworld.com/en/models/424181#profileId-327470 (Light weight poop chute (30g))

https://makerworld.com/en/models/213926#profileId-233439 (AMS button adapter with PTFE tube)

https://makerworld.com/en/models/402613#profileId-304285 (Dual purpose bed scraper)

https://makerworld.com/en/models/394761#profileId-295931 (If you need to connect two bowden/PTFE tubes)

https://makerworld.com/en/models/375898#profileId-275865 (Drybox IKEA samla 22l)

https://makerworld.com/en/models/404520#profileId-306293 (Purge strip bin for Bambu P1S)