HSW Soldering Tip Cleaner Holder

HSW Soldering Tip Cleaner Holder

This model is designed to fit a standard Soldering Tip Cleaner. The inner diameter of the holder is 68mm. I have designed one model that requires standard HSW adapters and one model that does not require any adapters. The two models are show in the renders below.

Print Settings:

These holders can be printed in either PLA or PETG.

• Material: PLA/PETG
• Layer height: 0.2mm
• Perimeters/Wall Loops: 2
• Sparse Infill Density: 25%

Model 1 - Standard HSW adapters required:

Model 2 - No adapter required: