Gengar - Hueforge

Thanks for visiting!

Because who doesn't like Gengar. Had a lot of fun making this one.

If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position

Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Black Transmission Distance: 0.3
PLA Hatchbox Purple Transmission Distance: 2.6

PLA BambuLab Matte Lilac Purple Transmission Distance: 2
White Transmission Distance: 6


Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Purple
At layer #11 (0.96mm) swap to Lilac Purple
At layer #19 (1.6mm) swap to White for the rest.